TRINIC GFRC SCC

50lb Bag

GFRC- SCC . Superior Strength Balanced GFRC complete mix. This is a complete blend of white Portland cement, graded Quartzite sand, Silica Fume, Plasticiser and Trinic’s revolutionary admix blend. The proportions in this mix are designed to provide maximum strength for both compression and flexibility as well as superior consolidation. As with all of our products the GFRC Back coat premix is third party tested so you know that you’re working with the best materials.

BENEFITS OF USE
• Just add water and fiber and start pouring
• High performance minimum of 11,000 psi premix
• No freezing or molding worries
• Strongest premix available
• Custom blends available upon request

DOSAGE RECOMMENDATIONS
• Trinic SCC Premix contains all of the components necessary to make high performance GFRC, just
add water
• Add 6 – 7 lbs of water per bucket. You will be casting GFRC with a water to cement ratio of between
.24 and .28 with an ultimate strength in excess of 11,000 psi
• Each 50 lb bucket of dry material yields about .40 cubic feet of end product

TEMPERATURE / CURE RATE
• Trinic SCC Premix will cure out and be ready to demold the next day
• Add Stage II Accelerator for quicker cure rates
• Cover with plastic and heating blankets for best results
• Cure with equal air flow underneath to help prevent curling and warpage
• If you get it wet, wet down the whole piece including the bottom to prevent moisture loss or gain on
one side, which could cause curling

COVERAGE / YIELD
0.40 cubic feet per 50 lb bucket

SHELF LIFE / STORAGE
Shelf life: 1 year
Storage: store in sealed container, keep away from moisture