Mpc-301

Product Description MPC-301 is a three-component, high-solids, aliphatic polyurethane coating designed as a UV-stable, chemical-resistant topcoat. It gives a satin appearance and demonstrates excellent physical properties and resistance to industrial traffic. It can be applied over an epoxy primer or used to coat an existing epoxy or urethane coating. This product is also ecological and contains no VOCs. Principal applications o UV stable topcoats o Industrial Use – Garages; Warehouses; Airports and hangars; Processing and manufacturing plants. Maintenance facilities Packaging and Recommended Thickness MPC- 301 is offered in the following kit sizes: o 1-gallon kit (3.78L) / including anti-slip abrasive Mix Ratio by volume 4A:1B o Bulk packaging also available upon request Product Coverage: 500 sq. ft. / 3.78L (1 US gal.) @ 3.2 mils dft (81 microns) Surface Preparation Remove dust, dirt, grease, oil and all other contaminants with proper cleaner/degreaser. Prepare the surface mechanically as per ICRI-CSP2 profile by diamond grinding to ensure removal of laitance, curing agents and sealers. The compressive strength of a newly poured concrete substrate must be at least 25 MPA (3635 psi) after 28 days cure and at least 1.5 MPA (218 psi) tensile strength. Be careful with condensation (within 10 degrees of the dew point). Mixing Instructions Open container of component A then add component B to it (mixing ratio 4:1 by volume). Add bag of component C abrasive grit to the mixture. Mix the three components for at least 1 minute using a lowspeed drill (300-450 rpm) to reduce air entrapment and to obtain a homogeneous mixture.