Mpc-165

Product Description MPC-165 is a 100% solid, super fast curing two component epoxy coating designed for controlling moisture vapor emissions on new or deteriorated concrete floors. This coating is recommended to be applied as a primer in areas of high humidity or on wet concrete. When applied at a thickness of 18 mils, it exceeds ASTM F3010 product requirements for vapor permeance. This coating will withstand moisture vapor emission rates up to 25lbs./24hrs./1000 ft2 when applied properly. Areas of application o Industrial Use – Garages; Warehouses; Airports and hangars; Processing and manufacturing plants o Commercial Use – Shopping malls and boutiques; Hotels; Offices; Showrooms; Restaurants; Hospitals; Schools; Community centers o Residential Use – Entrances and hallways; basements; entertainment rooms; bathrooms; kitchens and living rooms; outdoors spaces and pool outlines Packaging and Recommended Thickness MPC- 165 is offered in the following kit sizes: o 3-gallon kit (3.78L x 2 resin (A) and 3.78L hardener (B)) o Bulk packaging also available upon request Recommended Film Thickness: 90-100 sq. ft. per gallon @ 18mils Surface Preparation Remove dust, dirt, grease, oil and all other contaminants with proper cleaner/degreaser. Prepare the surface mechanically as per ICRI-CSP2 profile by diamond grinding to ensure removal of laitance, curing agents and sealers. The compressive strength of a newly poured concrete substrate must be at least 25 MPA (3635 psi) after 28 days cure and at least 1.5 MPA (218 psi) tensile strength. Be careful with condensation (within 10 degrees of the dew point). All cracks, holes and irregularities must be repaired with our epoxy crack filler prior to applying the coating.