Menu
H-13 is enhanced for easy application, fast turnaround and represents a new generation of food safe protection for Concrete Countertops, and other high performance concrete. H-13 is a two component hybrid water based fast applying sealer with excellent stain, acid, and scratch resistance. H13 is easy to repair if damaged and deeply penetrates concrete surfaces, forming a chemical bond to the concrete surface
Aval in 1.5 Quart
Benefits Of Use
-Fast Drying Usually tack free in 15 min. Total application time under 2 hours
-Low sheen natural look with mild color enhancement of surface
-Uv stable will not turn yellow
-Spot repair possble
SURFACE PREPARATION
• Surface must be cured (three days after casting for Trinic’s GFRC mix design other mixes
may take longer).
• Surface should have a profile. We recommend sanding with a 200-400 grit or chemical
etching with 10 parts water to 1 part muriatic acid (add the acid to the water not the other
way around). Begin by wetting the entire surface with water then apply the diluted acid
solution to the surface with a rag quickly and evenly. Gently scrub the solution with a
Scotch-Brite pad. Then neutralize the surface with 10 parts water and 1 part ammonia using
the same technique as applying the acid solution. Allow surface to dry for 8 hours before
applying H-13.
• Surface must also be clean, free from dust, dirt, mildew, oil, grease, paint, sealers, curing
agents, waxes, and surface contamination. We recommend wiping the piece down with
acetone before starting the sealing process. Acetone leaves the least amount of residue of
most of the common solvents. Wait for 15 minutes before applying H-13.
TOOLS REQUIRED
• Accurate volumetric measuring utensils like syringes for small volumes and plastic mixing
cups for larger amounts.
• Drill and paint stir attachment
• Low nap roller like 3/16 to 3/8
• Acetone
• Kitchen timer or cell phone timer
• Bloxygen or other inert gas to prolong the life of the sealer after opening
WORKING TIME
The dilute sealer has a 60-minute pot life. Only mix enough material that can be used in 60
minutes. Change out roller after 60 minutes of use. Periodically remix any sealer that has sat
for more than 10 minutes to keep all ingredients in suspension.
$112.00
