NanoSeal-GLOSS

Sold in 1 quart containers 

Single Component and easy to apply with high abrasion resistance is available in gloss or matte.  Recommended number of coats varies.  2 will offer abrasion resistance.  6-8 will be needed for acid and staining resistance or on more porous substrates.

BENEFITS OF USE
• Seal and protects a multitude of substrates
• Adheres to alkalines, such as ASR – compromised concrete
• Adheres to acidics, such as incompletely neutralized acid stained substrates
• Fills pores and adds gloss without risk of whitening
• Very high abrasion resistance for superior durability
• Outstanding satin resistance for multi-site use
• Efflorescence resistance for easier cleaning
• New self-cross-linking nano-based waterborne copolymer that may just be the most
versatile and important coating available

SURFACE PREPARATION
Surface must be clean, free from dust, dirt, mildew, oil, grease, paint, sealers, curing agents,
waxes, and surface contamination.
We recommend wiping the piece down with acetone before starting the sealing process.
Acetone leaves the least amount of residue of most of the common solvents.

TEMPERATURE / CURE RATE
NanoSeal should be applied between temperatures of 50-90°F.
The next coat can be applied over the previous coat after it passes a simple scratch test (If you
can scratch it with your fingernail, its not ready for another coat yet).

APPLICATION
NanoSeal can be applied with a microfiber pad or cloth. Use a French swirl technique when
applying the sealer.
If needed NanoSeal can be diluted up to 75% with water. We recommend 50% dilution, this
makes for a thinner coat. Thinner coats mean better scratch resistance, better curing rates, as
well as easier to application without lines.

COVERAGE / YIELD
1 Quart of NanoSeal will cover approximately 200- 500 sq ft